Product Categories


Passive Fire Protection
 
Sound Insulation

Sound Absorption
 
HPL (High Pressure Laminate)

Cubicles & Lockers
 
External Wall Cladding

Furniture
 
 
Fire PROtec

The legal regulations in Europe demands that buildings are to be located, built, modified or maintained in a way that prevents fires from starting or fire and smoke from spreading while making it possible to rescue people and animals as well as enabling effective firefighting.

Fire curtains are an important component in current fire protection plans to prevent fires from spreading in buildings as well as for securing escape and rescue routes. By using these mobile systems new standards are set for creative freedom in building design. Automatic fire curtains are used especially in strongly frequented buildings such as shopping malls, underground parking and public facilities.

We use the latest manufacturing technology in the area of sheet metal forming to guarantee top quality and complete stability. The building structure is not affected, because head boxes and side guides can be integrated in the building. Even where steel plating remains visible for civil engineering reasons, high quality powder coating is available in all RAL-colours for a first-class surface.

Fire PROtec® fire curtains are made from high-quality, tear-resistant glass fabrics. Fabrics reinforced with stainless steel are vertically sewn with tear-resistant stainless steel thread. Fabrics are smoke-proof according to DIN EN 1634-3 and heat resistant according to STC (see graph) for up to 120 minutes. Rooms are closed off for 90 minutes. Additionally in the first 20 minutes of a blazing fire the system takes care of a reduced thermal radiation (< 15 kW/m²). Thus a safed passing of the ways along the fire curtain system is ensured. The complete Fire PROtec® system is classified by DIN EN 13501-2 E90 EW20 C2.

When the fire curtain is installed on the inside of buildings, one-side coated glass fabric according to DIN 4102-1, A2.

Simon Fire PROtec systems are tested according to EN 1634-1, classification E 90 EW 20 C2*, DIN EN13501-2 requirements.

Further tests:

  • Fabric is fire-proof according to DIN 4102-1, A2, and smoke-proof according to DIN EN 1634-3
  • Long-term function tested according to DIN EN 1191, 10,000 cycles
  • Weatherproof for outdoor use

* E90: Closes off rooms for 90 minutes | EW20: Limitation of thermal radiation for 20 minutes | C2: Self-closing, tested in 10,000 cycles

 

Technical Data:

Fabric: One-side fluorocarbon-coated glass fabric, about 680 g/m2, A2 according to DIN 4102-1, colour: grey

Unwind: descending by gravity (fail safe)

Wind up: planet drive, 24 V DC, 3 A with electric load breaking; maximum turning moment 4 Nm, roll shaft-integrated.

Installation: Ceiling / wall with appropriate approved mounting material

Maximum size: Width = 6 m, drop length = 6 m

Head box (W x H): Steel plate 1.2 mm powder-coated, RAL 7035 (standard colours), 150 x 180 mm or 180 x 210 mm for drop over 3 m

Side guides (W x H): Steel plate 1.2 mm powder-coated, RAL 7035 (50 x 100 mm)

Bottom Bar: Steel plate powder-coated, RAL 7035 with integrated round steel in fabric bag

Classification: E 90 EW 20 C2 according to DIN EN 13501-2

Fire resistance duration: 90 minutes



Product Photos:


PDF Documents or Brochures: